Genomic rearrangements generate hypervariable mini-chromosomes in host-specific isolates of the blast fungus

Supernumerary mini-chromosomes–a unique type of genomic structural variation–have been implicated in the emergence of virulence traits in plant pathogenic fungi. However, the mechanisms that facilitate the emergence and maintenance of mini-chromosomes across fungi remain poorly understood. In the blast fungus Magnaporthe oryzae (Syn. Pyricularia oryzae), mini-chromosomes have been first described in the early 1990s but, until very recently, have been overlooked in genomic studies. Here we investigated structural variation in four isolates of the blast fungus M. oryzae from different grass hosts and analyzed the sequences of mini-chromosomes in the rice, foxtail millet and goosegrass isolates. The mini-chromosomes of these isolates turned out to be highly diverse with distinct sequence composition. They are enriched in repetitive elements and have lower gene density than core-chromosomes. We identified several virulence-related genes in the mini-chromosome of the rice isolate, including the virulence-related polyketide synthase Ace1 and two variants of the effector gene AVR-Pik. Macrosynteny analyses around these loci revealed structural rearrangements, including inter-chromosomal translocations between core- and mini-chromosomes. Our findings provide evidence that mini-chromosomes emerge from structural rearrangements and segmental duplication of core-chromosomes and might contribute to adaptive evolution of the blast fungus.     

Physicomechanical Characterization and Optimization of EDTA–mPEG and Avicel®–EDTA–mPEG In Situ Melt Dispersion Mini-Pellets

The purpose of this study was to develop a physicomechanically customizable oral metal chelatory in situ hot melt dispersion mini-pellet entity which could be utilized within a binary drug delivery system. Avicel^® RC/CL type R-591 was included within the in situ hot melt dispersion mini-pellet formulations to determine the physicomechanical effect this compound would have on the mini-pellet formulations. The physicomechanical properties of the hot melt in situ mini-pellet formulations were mathematically fitting to regression curves. Physicomechanical adjustment of the in situ hot melt dispersion mini-pellet formulations could be mathematically predicted with the derived regression curve equations. The addition of Avicel^® RC/CL type R-591 increased the physicomechanical properties such as matrix hardness and increased total disintegration of the in situ hot melt dispersion mini-pellet formulations. The utilization of a physicomechanically customizable oral metal chelatory in situ hot melt dispersion mini-pellet entity within a binary drug delivery system would to achieve a synergistically enhance the activity of a drug-carrying entity or a permeation enhancing entity within a single drug delivery unit. The experimental results indicated that weights of the pellets that achieved optimal hardness ranged between 35 and 45 mg. The melt–dispersion formulations disintegrated within shorter time periods and maintained higher ethylenediaminetetraacetic acid (EDTA) concentrations whereas melt–dispersion formulations which included Avicel^® had superior physicomechanical properties. Disintegration times ranged between 1,000 s for melt–dispersions containing EDTA and methyloxy polyethylene glycol 2000 (mPEG) only, to >6,000 s for melt–dispersions comprising EDTA, mPEG, and Avicel^®.     

Seasonal timing of inundation affects riparian plant growth and flowering: implications for riparian vegetation composition

Changes to the timing of peak river flows caused by flow regulation affect riparian vegetation composition, but the mechanisms driving such vegetation changes are not well understood. We investigated experimentally the effects of timing of inundation on riparian plant growth and flowering. We collected 168 sods from 14 sites across five lowland rivers in south-eastern Australia. Plant cover and flowering within the sods were surveyed each season for a year. During this period, sods were inundated for 6 weeks in either early spring or in summer. Terrestrial plant taxa (which included most exotic species) senesced in response to inundation, regardless of its timing. In contrast, native amphibious species (particularly amphibious forbs) responded favourably to inundation in spring, but were unaffected by inundation in summer. Native and exotic emergent macrophytes responded favourably to inundation regardless of timing, and flowered frequently in both the spring- and the summer-inundation treatments. In contrast, many native annuals flowered only in the spring-inundation treatment, while more exotic grasses flowered in the summer-inundation treatment. In temperate climates, inundation in early spring followed by non-flooded conditions is likely to be important for promoting the growth of amphibious forbs and the recruitment and flowering of riparian annuals. Without inundation in spring, many terrestrial exotic weeds may flourish and set seed prior to any subsequent inundation (e.g. in summer). We contend that natural seasonal timing (i.e. winter-early spring) of flow peaks is important for the maintenance of native riverbank vegetation and reducing the extent of terrestrial exotic species within the riparian zone.     

Is Consumer Response to Plain/Standardised Tobacco Packaging Consistent with Framework Convention on Tobacco Control Guidelines? A Systematic Review of Quantitative Studies

Background and Objectives

Standardised or ‘plain’ tobacco packaging was introduced in Australia in December 2012 and is currently being considered in other countries. The primary objective of this systematic review was to locate, assess and synthesise published and grey literature relating to the potential impacts of standardised tobacco packaging as proposed by the guidelines for the international Framework Convention on Tobacco Control: reduced appeal, increased salience and effectiveness of health warnings, and more accurate perceptions of product strength and harm.

Methods

Electronic databases were searched and researchers in the field were contacted to identify studies. Eligible studies were published or unpublished primary research of any design, issued since 1980 and concerning tobacco packaging. Twenty-five quantitative studies reported relevant outcomes and met the inclusion criteria. A narrative synthesis was conducted.

Results

Studies that explored the impact of package design on appeal consistently found that standardised packaging reduced the appeal of cigarettes and smoking, and was associated with perceived lower quality, poorer taste and less desirable smoker identities. Although findings were mixed, standardised packs tended to increase the salience and effectiveness of health warnings in terms of recall, attention, believability and seriousness, with effects being mediated by the warning size, type and position on pack. Pack colour was found to influence perceptions of product harm and strength, with darker coloured standardised packs generally perceived as containing stronger tasting and more harmful cigarettes than fully branded packs; lighter coloured standardised packs suggested weaker and less harmful cigarettes. Findings were largely consistent, irrespective of location and sample.

Conclusions

The evidence strongly suggests that standardised packaging will reduce the appeal of packaging and of smoking in general; that it will go some way to reduce consumer misperceptions regarding product harm based upon package design; and will help make the legally required on-pack health warnings more salient.     

Two silicone nontoxic fouling release coatings: Hydrosilation cured PDMS and CaCO3 filled,ethoxysiloxane cured RTV11

Two silicone coatings have been evaluated for barnacle adhesion. One coating is an unfilled hydrosilation cured polydimethylsiloxane (PDMS) network, while the other is a room temperature vulcanized (RTV), filled, ethoxysiloxane cured PDMS elastomer, RTV11^?. The adhesion strength of one species of barnacle, Balanus eburneus, to the hydrosilation coatings is in the range of 0.37–0.60 kg cm^‐2 while the corresponding range for RTV11 is 0.64–0.90 kg cm^‐2. The easier release of B. eburneus from the hydrosilation cured network compared to RTV11 is discussed in relationship to differences in bulk and surface properties. Preliminary results suggest bulk modulus may be the most important parameter in determining barnacle adhesion strength. In light or mechanical property analysis, a re‐evaluation of surface properties and chemical stability is presented.     

Proteasomal Degradation of Eukaryotic Elongation Factor-2 Kinase (EF2K) Is Regulated by cAMP-PKA Signaling and the SCFβTRCP Ubiquitin E3 Ligase

Protein translation and degradation are critical for proper protein homeostasis, yet it remains unclear how these processes are dynamically regulated, or how they may directly balance or synergize with each other. An important translational control mechanism is the Ca²⁺/calmodulin-dependent phosphorylation of eukaryotic elongation factor-2 (eEF-2) by eukaryotic elongation factor-2 kinase (EF2K), which inhibits elongation of nascent polypeptide chains during translation. We previously described a reduction of EF2K activity in PC12 cells treated with NGF or forskolin. Here, we show that both forskolin- and IGF-1-mediated reductions of EF2K activity in PC12 cells are due to decreased EF2K protein levels, and this is attenuated by application of the proteasome inhibitor, MG132. We further demonstrate that proteasome-mediated degradation of EF2K occurs in response to A2A-type adenosine receptor stimulation, and that activation of protein kinase A (PKA) or phospho-mimetic mutation of the previously characterized PKA site, Ser-499, were sufficient to induce EF2K turnover in PC12 cells. A similar EF2K degradation mechanism was observed in primary neurons and HEK cells. Expression of a dominant-negative form of Cul1 in HEK cells demonstrated that EF2K levels are regulated by an SCF-type ubiquitin E3 ligase. Specifically, EF2K binds to the F-box proteins, βTRCP1 and βTRCP2, and βTRCP regulates EF2K levels and polyubiquitylation. We propose that the proteasomal degradation of EF2K provides a mechanistic link between activity-dependent protein synthesis and degradation.     

Sequence Analysis of In Vivo Defective Interfering-Like RNA of Influenza A H1N1 Pandemic Virus

Influenza virus defective interfering (DI) particles are naturally occurring noninfectious virions typically generated during in vitro serial passages in cell culture of the virus at a high multiplicity of infection. DI particles are recognized for the role they play in inhibiting viral replication and for the impact they have on the production of infectious virions. To date, influenza virus DI particles have been reported primarily as a phenomenon of cell culture and in experimentally infected embryonated chicken eggs. They have also been isolated from a respiratory infection of chickens. Using a sequencing approach, we characterize several subgenomic viral RNAs from human nasopharyngeal specimens infected with the influenza A(H1N1)pdm09 virus. The distribution of these in vivo-derived DI-like RNAs was similar to that of in vitro DIs, with the majority of the defective RNAs generated from the PB2 (segment 1) of the polymerase complex, followed by PB1 and PA. The lengths of the in vivo-derived DI-like segments also are similar to those of known in vitro DIs, and the in vivo-derived DI-like segments share internal deletions of the same segments. The presence of identical DI-like RNAs in patients linked by direct contact is compatible with transmission between them. The functional role of DI-like RNAs in natural infections remains to be established.     

Similar molecules spatially correlate with lipofuscin and N-retinylidene-N-retinylethanolamine in the mouse but not in the human retinal pigment epithelium

The accumulation of lipofuscin in the retinal pigment epithelium (RPE) has been implicated in the development of age-related macular degeneration (AMD) in humans. The exact composition of lipofuscin is not known but its best characterized component is N-retinylidene-N-retinylethanolamine (A2E), a byproduct of the retinoid visual cycle. Utilizing our recently developed matrix-assisted laser desorption/ionization imaging mass spectrometry (MALDI–IMS)-based technique to determine the spatial distribution of A2E, this study compares the relationships of lipofuscin fluorescence and A2E in the murine and human RPE on representative normal tissue. To identify molecules with similar spatial patterns, the images of A2E and lipofuscin were correlated with all the individual images in the MALDI–IMS dataset. In the murine RPE, there was a remarkable correlation between A2E and lipofuscin. In the human RPE, however, minimal correlation was detected. These results were reflected in the marked distinctions between the molecules that spatially correlated with the images of lipofuscin and A2E in the human RPE. While the distribution of murine lipofuscin showed highest similarities with some of the known A2E-adducts, the composition of human lipofuscin was significantly different. These results indicate that A2E metabolism may be altered in the human compared to the murine RPE.     

Estimated Effects of Different Alcohol Taxation and Price Policies on Health Inequalities: A Mathematical Modelling Study

Introduction

While evidence that alcohol pricing policies reduce alcohol-related health harm is robust, and alcohol taxation increases are a WHO “best buy” intervention, there is a lack of research comparing the scale and distribution across society of health impacts arising from alternative tax and price policy options. The aim of this study is to test whether four common alcohol taxation and pricing strategies differ in their impact on health inequalities.

Methods and Findings

An econometric epidemiological model was built with England 2014/2015 as the setting. Four pricing strategies implemented on top of the current tax were equalised to give the same 4.3% population-wide reduction in total alcohol-related mortality: current tax increase, a 13.4% all-product duty increase under the current UK system; a value-based tax, a 4.0% ad valorem tax based on product price; a strength-based tax, a volumetric tax of £0.22 per UK alcohol unit (= 8 g of ethanol); and minimum unit pricing, a minimum price threshold of £0.50 per unit, below which alcohol cannot be sold. Model inputs were calculated by combining data from representative household surveys on alcohol purchasing and consumption, administrative and healthcare data on 43 alcohol-attributable diseases, and published price elasticities and relative risk functions. Outcomes were annual per capita consumption, consumer spending, and alcohol-related deaths. Uncertainty was assessed via partial probabilistic sensitivity analysis (PSA) and scenario analysis.The pricing strategies differ as to how effects are distributed across the population, and, from a public health perspective, heavy drinkers in routine/manual occupations are a key group as they are at greatest risk of health harm from their drinking. Strength-based taxation and minimum unit pricing would have greater effects on mortality among drinkers in routine/manual occupations (particularly for heavy drinkers, where the estimated policy effects on mortality rates are as follows: current tax increase, −3.2%; value-based tax, −2.9%; strength-based tax, −6.1%; minimum unit pricing, −7.8%) and lesser impacts among drinkers in professional/managerial occupations (for heavy drinkers: current tax increase, −1.3%; value-based tax, −1.4%; strength-based tax, +0.2%; minimum unit pricing, +0.8%). Results from the PSA give slightly greater mean effects for both the routine/manual (current tax increase, −3.6% [95% uncertainty interval (UI) −6.1%, −0.6%]; value-based tax, −3.3% [UI −5.1%, −1.7%]; strength-based tax, −7.5% [UI −13.7%, −3.9%]; minimum unit pricing, −10.3% [UI −10.3%, −7.0%]) and professional/managerial occupation groups (current tax increase, −1.8% [UI −4.7%, +1.6%]; value-based tax, −1.9% [UI −3.6%, +0.4%]; strength-based tax, −0.8% [UI −6.9%, +4.0%]; minimum unit pricing, −0.7% [UI −5.6%, +3.6%]). Impacts of price changes on moderate drinkers were small regardless of income or socioeconomic group. Analysis of uncertainty shows that the relative effectiveness of the four policies is fairly stable, although uncertainty in the absolute scale of effects exists. Volumetric taxation and minimum unit pricing consistently outperform increasing the current tax or adding an ad valorem tax in terms of reducing mortality among the heaviest drinkers and reducing alcohol-related health inequalities (e.g., in the routine/manual occupation group, volumetric taxation reduces deaths more than increasing the current tax in 26 out of 30 probabilistic runs, minimum unit pricing reduces deaths more than volumetric tax in 21 out of 30 runs, and minimum unit pricing reduces deaths more than increasing the current tax in 30 out of 30 runs). Study limitations include reducing model complexity by not considering a largely ineffective ban on below-tax alcohol sales, special duty rates covering only small shares of the market, and the impact of tax fraud or retailer non-compliance with minimum unit prices.

Conclusions

Our model estimates that, compared to tax increases under the current system or introducing taxation based on product value, alcohol-content-based taxation or minimum unit pricing would lead to larger reductions in health inequalities across income groups. We also estimate that alcohol-content-based taxation and minimum unit pricing would have the largest impact on harmful drinking, with minimal effects on those drinking in moderation.